Mercedes W211, W203, W204 Radio Code Guide - All Models [2025]

Audio 20 (Standard)

• Basic AM/FM radio with CD
• Small monochrome display
• Most common in base models
• Serial Location: Display on screen or back label

Audio 50 (Premium)

• Color display with navigation
• DVD changer capability
• Found in higher trim levels
• Serial Location: Service menu or physical label

COMAND APS (Top)

• Full navigation system
• Large color display
• Vehicle settings integration
• Serial Location: Engineering menu

Method 1: Button Combination (Audio 20)

1. Turn radio on
2. Press and hold buttons 1 + 3 for 10 seconds
3. Serial displays: AL2910xxxxx format
4. Write down complete 14-character code

Method 2: Service Menu (Audio 50/COMAND)

1. Go to Setup → System → Version
2. Look for "Hardware" or "Serial"
3. Note down complete number
4. May also be in Engineering mode

Method 3: Physical Removal

1. Use radio removal tools (DIN keys)
2. Pull unit straight out
3. Check white label on back/side
4. W211 specific: May require dashboard trim removal

Audio 20 Code Entry:

1. Turn radio on (should show "CODE")
2. Use preset buttons to enter digits:
   • Button 1 = First digit
   • Button 2 = Second digit
   • Button 3 = Third digit
   • Button 4 = Fourth digit
3. Press and hold buttons 1+3 to confirm
4. Radio should unlock and play

Audio 50/COMAND Entry:

1. Navigate to Audio → Settings
2. Select "Enter Code" or "Anti-Theft"
3. Use rotary controller to select digits
4. Confirm each digit with center button
5. Select "OK" to complete entry

🔋 Battery Drain Issue

Problem: W211 prone to battery drain, causing frequent radio locks

Solution: Check alternator, battery health, and SAM modules

🖥️ COMAND Black Screen

Problem: Display goes black but unit still powers

Solution: May need COMAND repair, not just unlock code

🔧 Fiber Optic Issues

Problem: MOST bus problems affecting audio

Solution: Check fiber optic connections, may need professional diagnosis

Audio 5 (Basic)

• Simple AM/FM radio only
• LED display
• Found in early/base models
• Serial Location: Button combination only

Audio 10 (Standard)

• Radio with cassette or CD
• Small LCD display
• Most common in W203
• Serial Location: Display or back label

Audio 20 (Premium)

• CD changer capability
• Larger display
• Higher trim levels
• Serial Location: Multiple methods available

Method 1: Classic Button Method

1. Turn radio on
2. Press and hold buttons 1 + 6 simultaneously
3. Hold for 3-5 seconds
4. Serial displays in format: XXXXXXX (7-14 digits)
5. Note: Some W203 use 1+3 combination

Method 2: Alternative Buttons

1. If 1+6 doesn't work, try buttons 2 + 6
2. Or try buttons 1 + 3
3. Hold each combination for 10 seconds
4. W203 radios vary by production year

Method 3: Scan Mode

1. Turn radio on
2. Press SCAN button
3. While scanning, press buttons 1 + 6
4. Serial may display during scan cycle

Standard W203 Entry:

1. Turn radio on (displays "CODE" or "ENTER CODE")
2. Enter code using preset buttons:
   • Press button 1 repeatedly for first digit
   • Press button 2 repeatedly for second digit
   • Press button 3 repeatedly for third digit
   • Press button 4 repeatedly for fourth digit
3. After entering all 4 digits, press button 5 or button 6
4. Radio should unlock immediately

🚨 W203 Important Notes:

• Some W203s require holding button 5 for 3 seconds
• If code doesn't work first time, try buttons 1+3 to confirm
• Early W203 (2000-2002) may have different confirmation method
• Audio 5 systems might use BAND + SEEK to confirm

🔄 Multiple Button Combinations

Problem: W203 had several radio suppliers (Becker, Alpine, etc.)

Solution: Try different button combinations if first doesn't work

📅 Year-Specific Variations

Problem: 2000-2003 vs 2004-2007 have different procedures

Solution: Note your exact production year when ordering code

🎛️ Facelift Changes

Problem: 2004 facelift changed some radio systems

Solution: Pre-facelift vs post-facelift may need different approach

Audio 20 (Standard)

• Basic radio with CD player
• Monochrome display
• Standard in most W204
• Serial Location: Button combo or service menu

Audio 50 APS (Premium)

• Navigation system included
• Color display
• DVD player capability
• Serial Location: System information menu

COMAND NTG 4/4.5 (Top)

• Latest COMAND system
• Large color screen
• Full vehicle integration
• Serial Location: Engineering mode

Method 1: Modern Button Method

1. Turn radio on
2. Press and hold buttons 1 + 3 for 6 seconds
3. Serial displays as: NTG4xxxxx or AL29xxxxx
4. Write down complete number (usually 14 digits)

Method 2: COMAND Service Menu

1. Press Setup → System
2. Select Version Information
3. Look for "Hardware Version" or "Serial Number"
4. May need to scroll through multiple screens

Method 3: Engineering Mode (COMAND)

1. Turn off radio
2. Hold Back + Call + Hang-up buttons
3. Turn radio on while holding buttons
4. Navigate to system information
5. Warning: Exit engineering mode properly

Audio 20 Code Entry:

1. Turn radio on (shows "CODE" or "Enter Anti-Theft Code")
2. Use preset buttons (1-4) to enter digits:
   • Button 1 cycles through 0-9 for first digit
   • Button 2 cycles through 0-9 for second digit
   • Button 3 cycles through 0-9 for third digit
   • Button 4 cycles through 0-9 for fourth digit
3. When correct code displays, press and hold buttons 1+3
4. Radio unlocks and resumes normal operation

COMAND NTG Entry:

1. Navigate to Audio menu
2. Select Enter Code or Anti-Theft
3. Use controller knob to select each digit
4. Press center button to confirm each digit
5. Select OK or Confirm when complete

🔐 Enhanced Security

Feature: W204 has improved anti-theft protection

Note: More sensitive to power interruptions, may lock more frequently

🆕 NTG System Updates

Feature: COMAND can receive software updates

Note: Updates may reset radio, requiring code re-entry

🔧 CAN Bus Integration

Feature: Deep integration with vehicle systems

Note: Other ECU issues can affect radio operation